What happened here


1 / 3 A fire broke out in an air-conditioning boiler on the rooftop of North Block, New Delhi, at about 11.10 am on 26 October 2026, while welding and repair work was going on. Six fire tenders were sent and the fire department said it was brought under control. No casualties were reported. A short circuit during welding is suspected; the cause is not confirmed. Updated 27 October 2026.
Quick answers
What happened at North Block on 26 October 2026?
A fire broke out in an AC boiler on the rooftop at about 11.10 am during welding and repair work. Six fire tenders were sent and the fire department said it was brought under control.
Was anyone hurt?
No casualties were reported by any outlet we opened.
What caused it?
A short circuit during welding is suspected. It is not confirmed, and one outlet mentions another account about an old plastic water tank.
Was the building evacuated?
The reports do not say.
Has an inquiry been announced?
We found none as of 27 October 2026.
What happened
On Monday, 26 October 2026, at about 11.10 am, the Delhi Fire Services got a call about smoke rising from North Block, the Union Secretariat building on Raisina Hill in New Delhi that houses the Home and Finance ministries. Six fire tenders were sent. The fire department said the fire was in an air-conditioning (AC) boiler on the rooftop and that it was brought under control. No casualties were reported. Updated 27 October 2026.
Thick smoke was visible from outside the building. A Member of Parliament, on his way to Parliament, saw it and posted about it on social media, which is how the news spread within minutes. PTI, Hans India, India TV News, WION, The Tribune and Asianet Newsable all carried the story the same afternoon. None of them reports any injury, and none gives an exact time at which the fire was put out.
What the fire department says about the cause
The cause is not established. Officials told the media that welding and repair work was going on at the time, and that a short circuit in the AC boiler is the suspected trigger (Hans India, Asianet Newsable, PTC News; The Tribune says it was “reportedly” so and that dismantling work was also under way on the terrace). PTI says preliminary information points to a suspected electrical short circuit and that a police officer said the ongoing maintenance could have contributed. India TV News also says construction work was under way. WION adds that some other accounts speak of a fire in an old plastic water tank on the terrace, which labourers put out themselves; the fire department’s own statement does not say this, and we could not confirm it. The fire department called the fire minor.
We found no report of an inquiry, a damage assessment, a hot-work permit, a fire watch or an alarm activation. We did not find any statement on whether staff were moved out of the building. Please treat all of these as not stated, not as “none”.

Could it have gone beyond control? What the facts show
This was a fire in a government office building, so we ask the question even though nobody was hurt. We only use what the reports say.
- People inside: not stated. No report says how many people were in the building or whether anyone was asked to leave.
- What was burning: an AC boiler on the rooftop, with welding and repair work under way. One outlet mentions a plastic water tank in other accounts. The reports do not describe any spread to the floors below.
- Response: the call came at about 11.10 am, six tenders were sent, and the fire department said the fire was under control. Reports published between about 11.30 am and 3 pm already described it as controlled. Whether alarms or sprinklers played any part is not stated.
- Near-miss: no official has said what might have happened with a different timing or ignition point, and we will not guess. What is on record is that the ignition was linked to work being done on a roof, which is a known fire setting.
- Follow-up: none announced as of our check on 27 October 2026.
So the record supports “a small rooftop fire during hot work, quickly controlled”. It does not support any larger claim. We call it a near-miss because the work that was being done is the kind that sets off fires in buildings of every kind.
Why this matters
Welding, grinding and gas cutting throw sparks and hot metal that can travel well beyond the spot where the work is done, and they are a familiar link in fires during repairs. We saw it in the Surat New Civil Hospital fire in an old block under repair, in the Noida Sector 126 shop fire where welding sparks are mentioned, and in the Chincholi MIDC chemical fire in Solapur. A government office is a place where records, wiring and many people sit together, so a fire during maintenance is worth taking seriously even when the damage is small. See also our Danilimda police station fire report.

Lessons for readers
- Treat welding and cutting as a permit job. Before any hot work in an office, hospital or school building, the owner should issue a written permit that names the place, the time and who is responsible.
- Clear the area first. Move or cover anything that can burn near the work, including packaging, wooden items, plastic tanks and cables, and check below the work area as well as around it.
- Keep a fire watch. One person with a fire extinguisher should watch the work, and keep watching for some time after it stops, because a smouldering spark can flare later.
- Switch off and isolate. Plant such as an AC boiler should be isolated from power and fuel before it is repaired, and only qualified electricians and welders should work on it.
- If you see smoke from a roof or a floor above you: follow the building alarm and the fire warden, use the stairs and not the lift, and call 101 or 112. Our guide to calling 112, 101 or 108 and the emergency numbers guide explain what to say.
- Practise getting out. Offices should run drills and have a plan that works on the day; see our notes on fire drills and on making an evacuation plan.
More on Delhi: see our Delhi fire and emergency safety guide for fire brigade numbers, every fire station and the local risks to know.
What is still not known
We do not know the exact time the fire was put out, how many people were in the building, whether anyone was moved out, how much damage was done, or whether the water tank account is correct. The cause is a suspected short circuit during welding, not a finding. No inquiry, permit check or fire-safety direction has been reported. Last checked 27 October 2026. We will update this page if the fire department or the government publishes a finding.
- Delhi Fire Services receives a call about smoke from North Block; six fire tenders are sent
- A Member of Parliament, passing on his way to Parliament, sees thick smoke and posts about it
- The fire department says the fire has been brought under control; no casualties (The Tribune, updated 12.14 pm IST; WION 12.19 pm)
- Hans India reports the suspected cause as a short circuit during welding in the AC boiler
- Asianet Newsable (3.13 pm) repeats the fire department's statement; still no damage assessment or inquiry
- No inquiry, damage figure or fire-safety direction found
Why consequences escalated
- A small fire started in an AC boiler on the rooftop while welding or repair work was going on.
- Six fire tenders were sent and the fire department said the fire was under control.
- No injuries or deaths were reported by any outlet.
- The cause is a suspected short circuit; one outlet also reports another account about an old plastic water tank.
- Occupancy, evacuation, alarms and any hot-work permit are not stated in the reports.
Failures and risk multipliers
- Hot work (welding) on a roof near electrical and AC plant; a fire watch and permit are not reported (not stated, not confirmed absent).
- A suspected electrical short circuit in the AC boiler during the work (not confirmed).
- Possible combustible material such as a plastic tank on the terrace (one outlet, other accounts).
- No public information on whether people in the building were alerted or moved out.
Actions that reduce risk
- Issue a written hot-work permit for every welding or cutting job in an occupied building.
- Clear or cover combustibles near and below the work, and keep an extinguisher and a fire watch in place during and after the work.
- Isolate AC and electrical plant before repair and use qualified welders and electricians.
- If you see smoke above you, follow the alarm, use the stairs and call 101 or 112.
- Authorities: publish the cause and any fire-safety direction after a fire in a government building under repair.
















Leave a comment